 |
|
|
|
ACCU DYNE TEST™ Marker Pens
|
The ACCU DYNE TEST™ Marker Pen
is based on a valve tip applicator in order to keep
the testing part of the pen away from the fluid storage part of
the pen (in other words, no wicking from the substrate). By pressing the tip
firmly down, the valve is opened and fresh fluid floods the tip;
this flushes it clean, and allows the tester to lightly pass over
the sample to accurately determine dyne level. Results are based
on how long the test solution takes to form beads on the sample
surface.
|
|
- 16 Standard levels, from 30 through 60 dynes/cm
- Specifically designed for fast, accurate on-line use by printers, coaters,
and laminators Also ideal for process control or field use by suppliers
of film, sheet, coated board, inks, coatings, and adhesives
- Spring loaded tip meters fluid feed and guards against contamination
- Reliable enough for many R & D and lab applications
- Hundreds of tests from each marker
- Usable on virtually all smooth non-absorptive substrates
- Six month shelf life; mix certifications provided with every order
- Specify any combination of dyne levels and quantities you require
(minimum order four pens)
- Conveniently packaged in ready to use setup boxes
ACCU DYNE TEST™ Procedure
Dyne Testing Applications and Tips
|
|
|
|
|
|
|
|
|
|
|
|
