UV PLUS Anilox Roll and Ink Cleaner
Our strongest liquid UV ink cleaner available. Engineered to clean those stubborn UV inks. If you are looking for the best UV ink cleaner, look no further.
- Specially formulated for problematic UV ink cleaning.
- 100% Biodegradable formula - Safe for your employees and the environment.
- The most powerful and fastest-acting anilox roll cleaner available anywhere, dissolves UV ink on contact.
- On-press cleaning reduces risk of damage from ultrasonic or soda-blast cleaning.
- Removes all dried UV ink, solvent-based ink and water-based inks.
- Money-Back Guaranteed.
Looking for anilox cleaning products specially formulated for cleaning stubborn UV inks? Need something to come in and do the job that others can't? Try our UV Plus anilox roll and ink cleaner. This super-concentrated, safe solution is packed with a blend of active, modern, environmentally-friendly cleaners. This chemical rich, concentrated formula is loaded with ink-attacking, cleaner safe solvents and powerful soaps. It is especially effective on problematic UV inks and water or solvent based inks as well. This is the all-in-one solution you have been looking for.
Mix at 1:1 with water for old, stubborn UV ink or as a periodic cleaner. For daily cleaning, mix 4:1 or higher dilution with water as conditions allow. Performs excellent in any ultrasonic cleaning tank or soak system. Effective and safe on both ceramic and chrome anilox rolls. Use to remove any type of ink from any anilox roll and as a general purpose cleaner. Use in tandem with our UV Plus anigel anilox cleaning gel to achieve best results. Try our strongest UV ink cleaner today!
Product Uses and Mixing Ratios
Use for in-press or off-press daily or periodic cleaning of any chrome or ceramic anilox roll. Start at full strength or 1:1 mixing ratio (1 gal. water to 1 gal. cleaner) for old, stubborn ink up to 4:1 (4 gal. water to 1 gal. cleaner) or a higher dilution as conditions allow. Spray or pour on any type of anilox roll, scrub with appropriate brush, then rinse off with water.
Water-based water soluble formula, Appearance: clear gel-type viscous liquid, pumice and abrasive free, Odor: minimal, pH (concentrate): 10.25, Total % VOC: 5%
Readily biodegradable, environmentally-friendly, pH stable, non-corrosive, non-toxic, non-combustible, non-fuming, not Sara 313 listed, non-flammable, no flashpoint, no fire hazard, 0-flammability rating, non-ozone depleting, and low-aquatic toxicity. Contains no chlorinated solvents, no petroleum distillates, no EPA Hazardous Air Pollutants (HAP), no carcinogens, and no marine pollutants. Product contains no ingredient that causes carcinogenic effects, mutagenic effects, teratogenic effects, or developmental toxicity. Passes plate compatibility testing.
NFPA rating Health (NFPA): 1, Flammability: 0, Reactivity: 0.
HMIS rating Health(HMIS): 1, Flammability: 0, Reactivity: 0.
HS Tariff code: 2909.49.60.00
Back to FlexoCleaners page.