Double-Sided Poly Foam, Standard Thickness Mounting Tapes.
Developed for wide web, flexible packaging print reproduction, and photopolymer or rubber printing plates of all thicknesses and types. Achieve maximum ink coverage on screen areas, minimize occurrences of dot gain or slur. Achieve optimal results when using proper impression settings on press. Multi-layer reinforcement films for consistent thickness and lay-flat, easy-to-apply usage. Each tape has its own application range, depending upon graphics or material printed. Excellent, long-life reproduction, balanced compression, consistent thickness. EZ mount adhesion system simplifies plate mounting, improves reliability. Secure hold-down, easy-release cushions, virtually no adhesive transfer to the backside of the plate.
Download - Adheso Flex Series data sheet, English 624KB
Flex ML
Medium Low Density
For use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Thickness: 0.51mm, 0.38mm.
Products: Flex ML20T - High Adhesion, Flex ML20 - Ultra High Adhesion, Flex ML15 - High Adhesion.
Flex MD
Medium Density
Recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Thickness: 0.51mm.
Products: Flex MD20T High Adhesion, FlexMD20 Platinum - Medium Adhesion, Flex MD20 - Ultra-High Adhesion, Flex MD15 - High Adhesion
Flex MH
Medium High Density
Recommended for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. Thickness: 0.51mm.
Products: Flex MH20T - High Adhesion, Flex MH 20 Platinum - Medium Adhesion, Flex MH20 - Ultra High Adhesion
Flex HD
High Density
For use in dense tonal reproduction of solid image area, where absorbent substrates or maximum block ink coverage is required. Thickness: 0.51mm, 0.38mm.
Products: Flex HD20T - High Adhesion, FlexHD20 Platinum - Medium Adhesion, Flex HD15 - High Adhesion