3M Flexographic Mounting Systems

The Cushion-Mount™ Plus Process Printing Tapes have a low density which maximizes dot reproduction for high quality process work and screen printing.

Product Number Application Thickness Inches (mm) Manufactured Target Thickness Inches (mm) Description Plates Cylinders Color Features
11 Series 3M™Cushion-Mount™ Plus Process Printing Tapes
E1115H, E1115, 1115 0.015 (0.38) 0.017 (0.43) Differential acrylate adhesive system on each side of a foam carrier, protected by a release liner on one side.(E1120-20 now replaces 1120-20) P SS/SL Tan Better tone reproduction than the standard combination printing tapes.
Clean removal from plate and print cylinder.
E1115-15H, E1115-15, 1115-15 0.015 (0.38) 0.015 (0.38)
E1120H, E1120, 1120 0.020 (0.51) 0.022 (0.56)
E1120-20H, E1120-20 0.020 (0.51) 0.020 (0.51)
1120K 0.020 (0.51) 0.022 (0.56) SL

E - Air Release Standard Plate Side Adhesion, EH - Air Release High Plate Side Adhesion, M - Modified Plate Side Adhesion P - Photopolymer Plates, R - For Rubber Plates, S - High Adhesion on Cylinder/Sleeve Side, SL - Sleeve, SS - Stainless Steel Cylinder.

Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.